Lighting made in Germany

LED tube luminaire

INROLED_25

Slender, lightweight, discreet

The INROLED_25 was developed for hygiene-sensitive areas, such as the food industry or pharmaceutical industry, but is also used in other industrial areas.The LED tube luminaire complies the requirements of standards for food safety. FDA-certification (Food and Drug Administration) is currently being prepared. The INROLED_25 has a diameter of only 25 mm and can be installed easily and quickly.

YOUR BENEFITS

  • Wide spread and homogeneous light
  • Flicker-free light without UV and IR components
  • Suitable for F&B
  • For use under higher temperatures
  • Resistant to hydrogen peroxide (H2O2, max. 35%), acids and alkaline solutions (preliminary testing on a case-by-case basis)
  • Very slender construction and extremely lightweight
  • Luminaire can be freely positioned within the pivot range
  • No dirt-collecting edges

AREAS OF APPLICATION

  • Packaging industry
  • Food & beverage
  • Pharmaceutical industry
  • Machines, assembly, conveyor belts
  • Architecture and buildings

THE TECHNOLOGY

  • High-performance LED chips for daylight white 5200-5700K
  • Beam angle 100° and colour rendition Ra >80
  • Housing: Protective tube made of 2 mm thick, splinter-free polycarbonate with sealed end caps
  • Aluminium base body for optimal thermal management
  • Hardly any heating, residual heat dissipation through ribbed internal aluminium base body
  • Tube luminaire geometry Ø25 mm
  • 3 lengths: 348 mm, 552 mm, 952 mm
  • Luminous flux, depending on version, from 300 lm to 875 lm
  • IP69K degree of protection and service life > 60,000h (L70/B10)
  • 24V DC connection voltage via M12 plug connection
  • FDA compliant materials; M12 plug connector made of stainless steel (F&B compliant) encapsulated in housing
  • Fastening with spring clamps for mounting and quick change, or separately available accessories
  • CE and ETL-listed test seal
  • Maintenance-free, 36-month warranty
  • Produced in Germany
Luminaire holder in the scope of delivery

Models

Product Accessories

INROLED_25 spring clamp for pivotable mounting
INROLED_25 spring clamp for pivotable mounting
Item No.: included
INROLED_25 luminaire holder, Suitable for F&B, 1 pair
INROLED_25 luminaire holder cable ties + base, metal detectable PP,1 pair

* Average and maximum lighting intensities, measurement area 100 cm x 100 cm at 100 cm distance
Delivery incl. luminaire holder (spring clamps), 1 pair for pivotable mounting
For power supplies and connection material, see accessories

This site uses third-party website tracking technologies to provide its services. I agree to this and can revoke or change my consent at any time with effect for the future.

Settings AcceptLegal Notice