Lighting made in Germany

LED surface-mounted luminaire

TOPLED Mounting version

Very small, extremely robust and bright

The TOPLED was developed for the illumination of a workpiece to be machined at close range. The surface-mounted LED luminaire requires only minimal space, is extremely robust and provides powerful and accurate illumination. Thanks to its small size, it can be used very close to the machining area.

Abbildung der LED Maschinenleuchte | LED Aufbauleuchte | TOPLED_Aufbau - LED2WORK


  • Precisely positioned, flicker-free light without UV and IR components
  • Close, low-shadow lighting on the machining area
  • Simple upgrading or retrofitting in machine tools
  • Oil-resistant and chip bombardment-proof


  • Metal processing
  • Plastic processing
  • Machine tools
  • CNC systems
  • Machines for wood working


  • High-performance LED chips for daylight white 5200-5700K
  • Bright with 680 lm, beam angle of 40° and colour rendition Ra>80
  • 4 mm ESG: oil-resistant and chip bombardment-proof
  • Suitable for CNC
  • Aluminium base body for good heat dissipation to the rear – no thermal stress
  • IP 67 degree of protection and a long service life > 50,000h (L80/B10)
  • 24V DC connection using 150 mm connection cable with M12 plug connector
  • Mounting directly on the machine cladding
  • Maintenance-free, 36-month warranty
  • Produced in Germany
View of rear


  • Diameter 50 mm with beam angle of 40°
Article number Power consumption Lamp luminous flux Data sheet
TOPLED machine LED luminaire 111913-01 ~8,4 W 982 lm Data sheet

For sufficient cooling, the luminaire must be mounted on a metallic surface, e.g. machine cladding 400 x 400 mm, thickness 3 mm. Heat conducting paste is recommended.

For power supplies and connection material, see accessories.

This site uses third-party website tracking technologies to provide its services. I agree to this and can revoke or change my consent at any time with effect for the future.

Settings AcceptLegal Notice